Ricoh SP 3710DN - Page 144

5.System Maintenance
132
Item
Selections
Remarks
(Tray 1,
Bypass Tray)
Custom Paper
Size: Unit
mm */ Inch *
If the paper size factory
default is A4, then the
custom size factory default
unit is mm.
If the paper size factory
default is Letter, then the
custom size factory default
unit is inch.
(Tray 1,
Bypass Tray)
Custom Paper
Size:
Horizontal
100–216 mm (3.94–8.50 inch)
Precision is two digits after
the decimal point in inch or
one digit after the decimal
point in mm.
If an input value is more
than the maximum value,
then it will be treated as the
maximum value.
If an input value is less than
the minimum value, then it
will be treated as the
minimum value.
(Tray 1,
Bypass Tray)
Custom Paper
Size: Vertical
148–356mm (5.83–14.02 inch.)
Precision is two digits after
the decimal point in inch or
one digit after the decimal
point in mm.
If an input value is more
than the maximum value,
then it will be treated as the
maximum value.
If an input value is less than
the minimum value, then it
will be treated as the
minimum value.
Tray Priority:
Default Tray
Tray1 */ Bypass Tray
-
Bypass Tray
Priority
Machine Setting(s)/ Any Size/Type/ Any Custom
Size/Type
-
Size
Mismatch
On / Off*
-