Ricoh SP 3710DN - Page 146

5.System Maintenance
134
Group
Item
Selections
Remarks
Adjustment
Horizontal *
(-15 to +15)
step
0.34 mm per step. Range is -5.4 mm to
+5.1 mm.
Adjustment
Vertical *
(-15 to +15)
step
0.24 mm per step. Range is -3.6 mm to
+3.6 mm
*: If the machine settings are reset to the factory defaults, this value does not change.
System
Item
Selections
Remarks
Auto Continue
On/ Off *
-
Copies
1*-999
-
Sub Paper
Size
Off */ Auto
-
2 Sided Print
Off */ Short Edge Bind/ Long Edge Bind
-
Blank Page
Print
Print */ Not Print
"Manual Duplex/Cover" has
higher priority than the
"Blank Pages" setting.
Energy Saver
Mode 1
On/ Off *
-
Energy Saver
Mode 2
On */ Off
-
Energy Saver
Mode 2 Timer
30 sec*, 1 - 240 min
-
Low Humidity
Mode
On/ Off *
-
Image Density
Adjustment
-3 to 3 (0*)
-
Print Error
On/ Off *
-