Ricoh SP 3710DN - Page 155

5.System Maintenance
143
Group
Item
Selections
Remarks
Register
-
-
Service Test Call
-
-
*: Default
SP Mode 1
Group
Item
Remarks
Registration:
Tray 1
Horizontal
Adjusts the horizontal registration for each tray and paper type.
If the machine settings are reset to the factory defaults, this
value does not change.
[-40 to 40 / 1* / 0.1 mm/step]
Vertical: Plain
Paper
[-40 to 40 / 23* / 0.1 mm/step]
Vertical: Thick
Paper
[-40 to 40 / 23* / 0.1 mm/step]
Vertical: Thin
Paper
[-40 to 40 / 23* / 0.1 mm/step]
Registration:
Tray 2
Horizontal
[-40 to 40 / 2* / 0.1 mm/step]
Vertical: Plain
Paper
[-40 to 40 / 23* / 0.1 mm/step]
Vertical: Thick
Paper
[-40 to 40 / 23* / 0.1 mm/step]
Vertical: Thin
Paper
[-40 to 40 / 23* / 0.1 mm/step]
Registration:
Bypass Tray
Horizontal
[-40 to 40 / -5* / 0.1 mm/step]
Vertical: Plain
Paper
[-40 to 40 / 23* / 0.1 mm/step]
Vertical: Thick
[-40 to 40 / 23* / 0.1 mm/step]