5.System Maintenance
155
Total Counter:
The total counter is incremented by the main board each time the board issues a print command to the
engine.
The value is calculated as follows:
Total counter = Copier counter + Printer counter + Fax counter + Reports printed
Application Counters:
Application counters exist for each individual primary machine function (Printer, Scanner, Copier,
Facsimile, and paper misfeed), and are incremented by the main board each time the board issues a
print request for the function in question.
The application counters are set to 0 if you select "Factory Default" in the "Maintenance Mode (SP
mode)".
Special Sender list
To Next Page
Loading...
