7.Detailed Descriptions
242
Recommendation
We recommend that the default settings should be kept.
If the customer requests that these settings should be changed, please explain that their energy
costs could increase, and that they should consider the effects on the environment of extra energy
use.
If it is necessary to change the settings, please try to make sure that the Energy Saver Mode 2
Timer is not too long. Try with a shorter setting first, such as 30 min., then go to a longer one (such
as 60 min.) if the customer is not satisfied.
If the timers are all set to the maximum value, the machine will not begin saving energy until 240
minutes has expired after the last job. This means that after the customer has finished using the
machine for the day, energy will be consumed that could otherwise be saved.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
