RIGOL
User’s Guide for DM3058
General Inspection
Please inspect you new DM3058 Digital Multimeter according to the following
steps:
1． Inspect the shipping container for damage.
Keep the damaged shipping container or cushioning material until the
contents of the shipment have been checked for completeness and the
instrument has been checked mechanically and electrically.
2． Check the accessories.
Accessories supplied with the instrument are listed in "DM3058 Accessories"
at Appendix A of this guide.
If the contents are incomplete or damaged, please notify the RIGOL Sales
Representative.
3． Inspect the instrument.
In case of any damage, or defect, or failure, notify the RIGOL Sales
Representative.
If the shipping container is damaged, or the protective material shows signs
of stress, notify the carrier as well as your RIGOL sales office. Keep the
shipping materials for the carrier’s inspection.
RIGOL offices will arrange reparation or replacement at RIGOL’s option
without waiting for claim settlement.
To Next Page
Loading...
