RIGOL
User’s Guide for DM3058
Example 6: Temperature Sensor
As one of the most commonly detecting element of temperature, Thermocouple
Sensor is successful applied in DM3058 which is used to measure temperature
inside the machine near cold side of Thermocouple that is shown in main display.
Operating Steps:
About the connection of Sensor please refer to “To Measure Sensor” in chapter 2.
Figure 3-12 Sketch map for connecting
1. Press New to enter into the setting interface.
Figure 3-13 New interface
2. Press Prpty to enter into the edit interface of Property.
Figure 3-14 Edit interface
(1) Press Name and input the name of this sensor: SensorT. Then, go back to
Edit interface of Property via clicking Done.
To Next Page
Loading...
