RIGOL
User’s Guide for DM3058
Preset
Preset Mode is provided to avoid error operation via testing product line in DM3058.
In random operation mode, please press to enter into following menu.
Figure 2-56 Interface of Preset (two pages in all)
Ten preset keys existing in Preset Mode and all of them are corresponding with the
10 configuration files in Configuration memorizer respectively.
Press Setn （n=1~10）for recalling its corresponding settings and exit Preset
menu.
Explanations:
A click will be emitted (about 1.5s) by instrument after you press any Preset
configuration key if an effective configuration is existing in its Location of
corresponding key, meanwhile, current measurement configuration will be
refreshed to the one has been stored. If the selective Configuration Location is
empty, the instrument will emit “click (about 0.3s) pause (about 0.3s)
click (about 0.3s)” and then go back to primary testing state.
Enter into Preset menu in Ordinary Measurement Mode and press and
Random configuration key one by one, and then current measurement
configuration would be saved into corresponding Location and named “Setn”
as a default.
Besides, you can also recall or save Preset configuration by using key.
To Next Page
Loading...
