RIGOL
User’s Guide for DM3058
To Measure AC Current
DM3058 Multimeter enables to measure AC Current up to 10A. For the details
about how to connect and measure please refer to the following steps.
Operating Steps:
1. Connecting the red lead (Test leads) to Terminal Input-HI (tested circuit) and
black lead to Terminal Input-LO as shown in Figure2-14.
Figure 2-14 Sketch map for connecting
2. Press to enter into AC Current Measurement interface.
Figure 2-15 AC Current Measurement Interface
3. Choose a proper Current range according to the measured circuit
Table 2-4 Measurement Characteristics of AC Current
10A(Real Panel), 250V(Fuse), 12A(Inside
the instrument)
To Next Page
Loading...
