RIGOL
User’s Guide for DM3058
Example 1: Reading Statistic Functions
How to realize the statistic function of maximum value for readings during
measuring
The first reading is taken as the maximum value and being shown on the display. It
will be refreshed to new maximum value sub sequentially.
Operating Steps:
1. To measure an AC Voltage. Connect test leads as shown below:
2. Press button, select AC Voltage measurement function. Choose an
appropriate measurement range.
3. Set the Statistic measurement function parameters.
Press Stats MAX Open to statistic maximum value from the
measurement result.
4. Lead test leads into the circuit and start to measure.
As shown in figure 3-2, current Statistic State is “MAX” and current reading is
the maximum of all.
Figure 3-1 Statistic Maximum
To Next Page
Loading...
