RIGOL
User’s Guide for DM3058
To Measure Capacitance
The DM3058 Digital Multimeter has the ability to test Capacitance up to 10000μF.
Following practice provides you a guide to get familiar with the Capacitance
measurement technique.
Operating Steps:
1. Connecting red lead to both Terminal Input-HI and anode of the capacitance
and black lead to both Terminal Input-LO and cathode of the capacitance as
shown in Figure 2-23.
Figure 2-23 Sketch map for connecting
2. Press to enter into Capacitance measurement interface.
Figure 2-24
Capacitance Measurement Interface
3. Choose an appropriate measurement range according to its scope.
To Next Page
Loading...
