RIGOL
User’s Guide for DM3058
Example 10: To Realize Remote Control via LXI
Remote Control function based on LXI can help users to operate instrument
remotely by internet. LAN setting offers two kinds of ways to get IP address: Auto
IP and Manual IP, which enable users into the remote control system. The detailed
operation steps are given in the following part:
Operation Steps:
1. Process LAN Auto IP, the instrument will get IP address
automatically.
Figure 3-44 Auto IP
2. Choose info; view the internet setting message by and on the
front panel.
Figure 3-45 Auto IP interface
3. Please input the IP address into the IE browser, then remote control system
interface will pop up as follows:
Figure 3-46 Welcome page
To Next Page
Loading...
