RIGOL
User’s Guide for DM3058
After application, the data appearing in the interface is unavailable by “!”.
2. If you found there are some problems existing please press Edit to modify.
Figure 2-52 Edit configuration file of Sensor
3. Press Load to recall configuration file within Sensor.
4. Press History to enter into the following interface to check the data getting
from this measurement and save.
Figure 2-53 View interface of History Information
There are three types of way for viewing historical date: “Info”,” List” and “HistoG”.
Press Save after checking, by pressing Update, the History information will be
refreshed to be current newest information.
5. To set Relative Value.（optional）
Press REL to open of close Relative operation. When it is open, “REL” is shown
over the screen and the reading displayed is a relative value which comes from
the result of Actual measurement vale reduces selected value. (For the
details about how to set, please refer to” Math” in Chapterer2.)
6. Measurement Value Display. Press Disp, to select showing mode for the
measurement result.
Figure 2-54 Display mode
Figure 2-55 Display the value
To Next Page
Loading...
