RIGOL
User’s Guide for DM3058
Figure 3-15 Edit interface of Name
(2) Press Type, to select the type of the sensor: Resistance.
Figure 3-16 Edit interface of Type
(3) Press Unit ℃, select the unit of the sensor: ℃
Figure 3-17 Edit interface of Unit
3. Press Define button, the interface shows below:
Figure 3-18 Edit interface of Reference value
4. Press Add button, input the first group of reference value: 111.480Ω, 29.5℃.
Figure 3-19 Input the first group of reference value
5. Press Done to get a fist group of reference value.
Figure 3-20 first group of reference value
To Next Page
Loading...
