Rigol DM3058

RIGOL
User’s Guide for DM3058
2-3
Explanations：
 When the input signal is beyond the current scope of the measurement range,
the multimeter will show “OVER RANGE”.
 After restarting and Remote being replacement, range options will turn back to
default “Automatic”.
 You are suggested to select Auto Range so as to protect the instrument against
damage and get exact datum as much as possible when it is hard to predict the
range of measurement.
 The range is fixed during testing the Continuity and checking the Diodes, The
range of Continuity is selected as 2KΩ while the Diodes are 2VDC.
NOTE
Other functions of the directive keys:
 In the Save interface, Up and Down keys are used to select address for
saving files.
 During inputting data, Up and Down keys are used to change the selected
value. Each press for up key, value will be increased 1, vice versa.
 At the input interface of data, Left and Right keys are used to switch the
number of a numerical value. Each press for Left key, former number will be
selected, vice versa.