Rigol DM3058

RIGOL
User’s Guide for DM3058
2-60
1. Set Up LAN I/O Parameter
LAN Parameters
Follow the procedures to set up a LAN configuration and remote interface from the
Front Panel.
Press  I/O  LAN, the display shows:
Figure 2-80 LAN Settings
Table 2-29 LAN Parameter Function Menu Description
Function
Menu
Settings
Description
DHCP
Open/Close DHCP
Auto IP
Set IP address automatically
Manual
IP
Set IP address manually
Info
View MAC address and other parameters.
Apply
Apply current LAN settings.
Default
Resume default settings.
DNS
Host Name/
Domain Name/
DNS address
Set the host name.
Set the domain name.
Set DNS address.
Save all changes, back to a higher level
menu.