Rigol DM3058

RIGOL
User’s Guide for DM3058
2-69
6. Power Supply
Power Supply of DM3058 contains of Real Panel’s switch of Power Supply and
software switch that could be set three working mode.
Press  System  Cfg  PwrOn to enter into the following interface
and select needed Power Supply Mode.
Figure 2-90 Choose power supply
PwrOn
Put through Power Supply and open the switch of Real Panel to startup the
Multimeter.
Default
Put through Power Supply and open the switch of Real Panel, then the multimeter
will resume last connecting state when the electricity is being cut forcibly.
Switch
Enable or Disable the front power switch.