Rigol DP832A - Memory[:State]:Lock; Memory[:State]:Store

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-19
:MEMory[:STATe]:LOCK
Syntax :MEMory[:STATe]:LOCK {RSF|ROF|RTF|RDF},{1|2|3|4|5|6|7|8|9|10},{ON|OFF}
:MEMory[:STATe]:LOCK? {RSF|ROF|RTF|RDF},{1|2|3|4|5|6|7|8|9|10}
Description Lock or unlock the file in the specified storage location.
Query whether the file in the specified storage location is locked.
Parameter
Name Type Range Default
{RSF|ROF|RTF|RDF} Discrete RSF|ROF|RTF|RDF None
{1|2|3|4|5|6|7|8|9|10} Discrete 1|2|3|4|5|6|7|8|9|10 None
{ON|OFF} Discrete ON|OFF OFF
Explanation The locked file cannot be saved and deleted, but can be read.
Return Format The query returns YES or NO.
Example :MEM:LOCK RSF,5,ON /*Lock the file in state file storage location 5*/
:MEM:LOCK? RSF,5 /*Query the locking state of the file in state file storage
location 5 and the query returns YES*/
:MEMory[:STATe]:STORe
Syntax :MEMory[:STATe]:STORe {RSF|RTF|RDF},{1|2|3|4|5|6|7|8|9|10}
Description Save the specified type of file to the specified storage location.
Parameter
Name Type Range Default
{RSF|RTF|RDF} Discrete RSF|RTF|RDF None
{1|2|3|4|5|6|7|8|9|10} Discrete 1|2|3|4|5|6|7|8|9|10 None
Explanation  This command is used to store state file, timer file and delay file. The storage
directory of the record file is specified by the
:RECorder:MEMory command and
the record file is stored automatically when the recorder is turned off.
 If the specified storage location already contains file, this command will
overwrite the original file directly. If the file stored in the specified storage
location is locked (refer to the
:MEMory[:STATe]:LOCK command), this
command will not overwrite the original file and the storage operation is
invalid.
Example :MEM:STOR RSF,5 /*Store the current instrument state to location 5*/
Related
Commands
*SAV
:RECorder:MEMory