RIGOL
DP800 Programming Guide V
Document Overview
This manual introduces how to program the power supply over remote interfaces in details.
Main Topics in this Manual:
Chapter 1 Programming Overview
This chapter introduces how to build the remote communication between the power supply and PC and how
to control the power supply remotely. Besides, it also provides a brief introduction of the SCPI commands.
Chapter 2 Command System
This chapter introduces the syntax, function, parameter and using instruction of each DP800 command in
A-Z order.
Chapter 3 Application Examples
This chapter provides the application examples of the main functions of the power supply. In the application
examples, a series of commands are combined to realize the basic functions of the power supply.
Chapter 4 Programming Demos
This chapter introduces how to program and control DP800 using various development tools, such as Visual
C++, Visual Basic and LabVIEW.
Chapter 5 Appendix
This chapter provides various information, such as the command list and factory setting list.
Tip
For the newest version of this manual, please download it from
www.rigol.com.
Format Conventions in this Manual:
1 Button
The function key at the front panel is denoted by the format of “Button Name (Bold) + Text Box” in the
manual, for example, Utility denotes the “System Auxiliary Function Setting” key.
2 Menu
The menu item is denoted by the format of “Menu Word (Bold) + Character Shading” in the manual,
for example, SysInfo denotes the “System Information” item under Utility.
3 Operation Step
The next step of the operation is denoted by an arrow “” in the manual. For example, Utility
System denotes pressing Utility at the front panel and then pressing System.
To Next Page
Loading...
