Rigol DP832A User Manual

Chapter 2 Front Panel Operations RIGOL
DP800 User Guide 2-41
Display Setting
Press Display on the front panel to enter the interface as shown in the figure below.
You can set the screen brightness, contrast, RGB luminance, display mode and
display theme. Besides, you can also define the start-up interface.
Figure 2-8 Display Setting Interface
Brightness
Press Display  Brightness and use the knob, left/right arrow key or numeric
keyboard to set the brightness of the screen. The range is from 1% to 100% and the
default is 50%. This setting is stored in the non-volatile memory and will not be
affected by factory reset.
Contrast
Press Display  Contrast and use the knob, left/right arrow key or numeric
keyboard to set the contrast of the screen. The range is from 1% to 100% and the
default is 25%. This setting is stored in the non-volatile memory and will not be
affected by factory reset.
RGB Luminance
Press Display  RGB Lum and use the knob, left/right arrow key or numeric
keyboard to set the RGB luminance of the screen. The range is from 1% to 100%
and the default is 50%. This setting is stored in the non-volatile memory and will not
be affected by factory reset.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Rigol DP832A Specifications

General

Brand	Rigol
Model	DP832A
Category	Power Supply
Language	English