Rigol DS2000E Series User Manual

Chapter 9 Pass/Fail Test RIGOL
DS2000E User’s Guide 9-1
Chapter 9 Pass/Fail Test
During the product design and manufacturing process, you usually need to monitor
the change of the signal or judge whether the product is up to standard. The
pass/fail test function of the DS2000E oscilloscope can fulfill this task perfectly.
The contents of this chapter:
 To Enable Pass/Fail Test
 To Select Source
 Mask Range
 To Set Test Results Output Type
 To Save the Test Mask
 To Load the Test Mask

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English