Rigol DS2000E Series User Manual

RIGOL Chapter 13 System Function Setting
DS2000E User’s Guide
13-10
System Time
The system time is displayed at the lower right corner of the screen in "hh:mm
(hour:minute)" format. When printing or storing a waveform, the file output will
contain this time information.
Press Utility  System  System Time  System Time to turn on the setting
interface as follows.
Figure 13-2 System Time Setting Interface
In the figure, the item in green (such as 2013) is the item that can be modified
currently. Use
to modify and press down to complete the input. The order of
time modifications is: year (2013) → month (04) → date (13) → hour (10) →
minute (20) → second (49). The setting range of each item conforms to the
convention:
 Year: 2011 to 2099
 Month: 01-12
 Date: 01-31 (28, 29 or 30)
 Hour: 00 to 23
 Minute: 00 to 59
 Second: 00 to 59
Press Apply to put the current setting into effect. The time at the lower right corner
of the screen will be updated.

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English