Rigol DS2000E Series - To Rename a File or Folder; To Clear the Local Memory

RIGOL Chapter 12 Store and Recall
12-14 DS2000E User’s Guide
To Rename a File or Folder
Rename operation is valid only in external storage. Before using the external disk,
make sure that the USB storage device is connected correctly.
Press Storage  Disk.Manage and use to select and open the external disk
("Disk D"). Use to select the desired file or folder to rename and then press
Rename to turn on the rename interface. For specific operations, please refer to the
descriptions in "
To Create a New File or Folder".
To Clear the Local Memory
Press Storage  Disk.Manage and select "Local Disk"; then, turn to the next page
of the menu and press SecurityClear  OK to delete all the files stored in the local
memory.
Note: Don’t press down after selecting "Local Disk"; otherwise, SecurityClear
will be grayed out and disabled.