Rigol DS2000E Series User Manual

Chapter 13 System Function Setting RIGOL
DS2000E User’s Guide
13-15
11. Copies
Press this key to set the number of copies to be printed. Rotate the
multi-function knob
to select the desired number of copies. The range is
from 1 to 999.
12. Invert
Press this key to set the print color invert to "ON" or "OFF" and the default is
"OFF".
Power Status
Connect the oscilloscope to AC power using a power cord and at this point, the
oscilloscope is energized. The DS2000E oscilloscope allows users to set the power
status of the oscilloscope after it is connected to power source. Press Utility 
PowerStatus to set the power status to "Default" or "Open".
 Default: after the oscilloscope is energized, press the power key on the front
panel to start the instrument.
 Open: the instrument starts directly when it is energized.
Note: At this point, you can still press the power key on the front panel to turn
off the instrument.

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English