Chapter 14 Remote Control RIGOL
DS2000E User’s Guide
6. Load LXI webpage
As this oscilloscope conforms to LXI Core 2011 Device class instrument
standards, you can load LXI webpage through Ultra Sigma (right click the
resource name and select "LXI-Web"). Various important information about the
oscilloscope (including the model number, manufacturer, serial number,
description, MAC address and IP address) will be displayed on the webpage.
In the LXI webpage, click "Network Settings" at the left side; then, input the
initial password "111111" in the pop-up window (by default, the user name is
empty) and click "OK" to view or modify the current network settings of the
instrument. Besides, you can also click "Security" at the left side of the webpage
to reset the password.
Tip
You can also load the LXI webpage by entering the IP address of the
instrument in the address bar of the PC browser.
To Next Page
Loading...
