Chapter 14 Remote Control RIGOL
DS2000E User’s Guide
Click to check whether the GPIB communication works
normally; if not, please follow the corresponding prompt messages to solve
the problem.
5. View device resource
The resources found will appear under the "RIGOL Online Resource" directory.
For example, DS2202E (GPIB0::1::INSTR).
6. Control the instrument remotely
Right click the resource name "DS2202E (GPIB0::1::INSTR)" and select "SCPI
Panel Control" to turn on the remote command control panel, through which you
can send commands and read data.
To Next Page
Loading...
Need help?
General
