Rigol DS2000E Series - Page 272

RIGOL Chapter 16 Specifications
DS2000E User’s Guide
16-2
Time Base Mode Y-T, X-Y, Roll
Number of X-Ys 1 path
Waveform Capture Rate
[2]
50,000 wfms/s (dots display)
Vertical
Bandwidth
(-3 dB) (50 Ω)
DS2102E: DC to 100 MHz
DS2202E: DC to 200 MHz
Single-shot Bandwidth (50 Ω) DS2102E: DC to 100 MHz
DS2202E: DC to 200 MHz
Vertical Resolution 8 bits
Vertical Scale
[3]
When the input impedance is 50 Ω: 500 μV/div
to 1 V/div
When the input impedance is 1 MΩ: 500 μV/div
to 10 V/div
Offset Range When the input impedance is 50 Ω:
500 μV /div to 50 mV/div: ±2 V
51 mV/div to 200 mV/div: ±10 V
205 mV/div to 1 V/div: ±12 V
When the input impedance is 1 MΩ:
500 μV /div to 50 mV/div: ±2 V
51 mV/div to 200 mV/div: ±10 V
205 mV/div to 2 V/div: ±50 V
2.05 V/div to 10 V/div: ±100 V
Bandwidth Limit
[1]
DS2102E: 20 MHz
DS2202E: 20 MHz/100 MHz
Low Frequency Response
(AC Coupling,
-3 dB)
≤5 Hz (on BNC)
Calculated Rise Time
[1]
DS2102E: 3.5 ns
DS2202E: 1.8 ns
DC Gain Accuracy
[3]
±2% of full scale
DC Offset Accuracy ±0.1 div±2 mV±1% of offset value
Channel-to-Channel Isolation DC to maximum bandwidth: >40 dB