Parameter Description Range Default
1 Mode of Operation. Note: This is
a legacy setting. The BDX com-
mand should be used.
0 = Off
1 = Auto Low
2 = Print
3 = Single
4 = Auto Hi
5 = Network
2
2 Printing Function 1 = Single
2 = Double
3 = Ticket
4 = Automatic Single
5 = Automatic Double
6 = Automatic Ticket
7 = Total
8 = Automatic Total
1
3 Auto Transmit Format 1 = AUTO.A
2 = AUTO.B
3 = AUTO.C
4 = AUTO.D
5 = CUSTOM
6 = AUTO.F
1
4 Number of columns to pad 0 .. 20 0
5 Number of rows to pad 0 .. 10 0
6 Auto Transmit Source 1 = Display
2 = Gross
3 = Net
4 = Total
1
7 Print interlock 0 = No interlock (NONE)
1 = Motion between printouts (MOTION)
2 = Return to zero between printouts (RET.Z)
0
8 Automatic output start character 0 .. 255 2
9 Automatic output end character 1 0 .. 255 3
10 Automatic output end character 2 0 .. 255 0
Example
Command Answer Description
S01; Select unit 1
PRS?; 0,1,1,0,0,1,0,2,3,0 CRLF Currently serial 2 is off
PRS2,3,,2,3; 0 CRLF Set for ticket printing with 2 columns and 3 rows padding
TDD1; 0 CRLF Save setting
21.3.41 PRT: Print
Force the instrument to print using configured printer. This is analogous with pressing the print key on the
front of the instrument. Sending a string to the indicator allows free layout of the printout. If the printout
could not be performed the reply from the indicator is ?CRLF.
General
No. of parameters 2
Save changes -
Increment Trade Counter -
Command Parameter Details
149 C500-600-2.0.3