67
Reading the Display
Recall
This screen displays a stored data on internal memory or SD memory card.
Use the
keys to select [Recall] and press the MENU/ENTER
key. The recall screen appears.
Use the keys to select a save location of data and the keys
to select a data le.
Pressing the PAUSE/CONT key switches back to the menu list screen.
Pressing the START/STOP key switches back to the measurement screen.
Note
It may take some time to read data and display the
recall screen if the volume of stored data is large.
Save location of data
Data les
The save location of data can be “Internal Memory Manual”, “SD Manual”,
“SD Auto Lv” or “SD Auto Leq”. Without an SD memory card, only “Internal
Memory Manual” is available.
Note
If a data file saved on a computer is copied or
manipulated, and the copied le is then loaded back
into the VM-55, the displayed measurement date
and time may not match the actual time stamp of
the measurement.
To Next Page
Loading...
