ProSYS User's Manual 15
Arm/ LED
The Arm/ LED indicates whether or not the system's intrusion detectors
are armed.
Condition Description
ON
The system's intrusion detectors are armed;
subsequent violations of a protected point or area
(e.g. a door, a window, unauthorized motion) will
result in a burglar alarm
OFF
The intrusion function of the system is disarmed.
SLOW FLASH
(about once every
second)
Indicates the system is in its Exit Delay time period.
RAPID FLASH
(about 4 times per
second)
Indicates an alarm condition, and occurs after
disarming an alarmed system while the display is in
Alarm Memory mode. To restore the display to
Normal Operation mode, press
.
Ready/ LED
The Ready/ LED indicates whether or not the system's intrusion zones
are secured and ready to be armed.
Condition Description
ON
All intrusion zones are secure; the system is ready to be
armed.
OFF
One or more intrusion zones are not secure, and the
system is not ready to be armed. Before the system can
be armed, the condition must be addressed.
-OR-
For 3 minutes when power is restored to an unpowered
system (if defined by your installer).
SLOW FLASH
Indicates the system is ready to be armed while a
specially designated entry/exit door remains open.
To Next Page
Loading...
Need help?
General
