20 ProSYS User's Manual
Chapter 3: Arming and Disarming the
System
Arming
Arming your system enables its intrusion detectors to trigger an alarm
when violated. Remember, fire protection and the protection offered by the
keypad's emergency keys are always armed and always available.
Your ProSYS offers the following kinds of arming:
) Away, page 20
) Stay, page 21
) Partition, page 22
) Group, page 24
) Quick, page 24
) Force, page 25
) Wireless Button, page 25
) Proximity Tag, page 25
) Keyswitch, page 25
) Access Control, page 25
Away Arming
Away arming prepares all of the system's intrusion detectors to sound an
alarm, if violated, and is used when leaving the premises empty.
¾ To away arm:
1)
Check the Ready/
LED on your keypad. If it is lit or flashing, the
system is READY to be armed.
If the Ready/
LED is NOT lit or flashing, the system is NOT ready
to be armed. In this case, secure or bypass the violated zone(s),
see page 30, and then proceed.
2)
THE JONESES
05:42 DEC 16 TUE
THE JONESES
05:42 DEC 16 TUE
Hold the tag close to the keypad's keys or enter
your user code and press
/ .
To Next Page
Loading...
Need help?
General
