ProSYS User's Manual 55
Chapter 12: Proximity Keypad
The proximity keypad enables you to use a proximity tag to arm and disarm
the security system or to activate and deactivate home appliances and
utilities, such as heating and lights.
Proximity tag programming is performed from the User Functions menu.
When programming a proximity tag, the following three options are
available:
) (RE)WRITE TAG: Adds a new proximity tag (described below).
) DEL BY USER: Deletes a proximity tag according to the user serial
number, as described on page 56.
) DEL BY TAG: Deletes a proximity tag according to the user tag, as
described on page 57.
This section also includes general instructions for using a proximity tag, as
described on page 58.
NOTES:
Users can define or delete their individual proximity tags, but the Grand Master
can define or delete any user's tag.
Each proximity tag can be assigned to only one user.
Adding a New Proximity Tag
You can add a new proximity tag for each user in the system, as required.
¾ To add a new proximity tag:
1)
USER FUNCTIONS:
1) BYPASS
USER FUNCTIONS:
1) BYPASS
From the User Functions menu, select [5] Access
Code.
2)
INSERT CODE:INSERT CODE:
Enter your user code.
3)
ACCESS CODE:
1) UPDATE CODES
ACCESS CODE:
1) UPDATE CODES
Select [5] Prox Tag.
4)
PROX TAG:
1) (RE)WRITE TAG
PROX TAG:
1) (RE)WRITE TAG
Select [1] (Re)Write Tag.
To Next Page
Loading...
Need help?
General
