32 ProSYS User's Manual
Chapter 5: Activating Home Appliances
(UOs)
[*] [2] [CODE] [#] [1]
You can place a household appliance, such as heating, lighting or an
external device, under the control of the ProSYS, where it can be
conveniently turned on and off automatically, or by user commands from
any system keypad.
There are two types of appliances, each of which behaves differently when
activated:
) Latched appliance: Remains activated until it is deactivated.
) Pulsed appliance: Remains activated for a predefined time, after
which it is automatically deactivated.
Ask your installer which of your appliances are defined as latched and
which are defined as pulsed.
NOTES:
The UO option applies to UOs that are defined as Follow Code. Ask your
installer for details about defining UOs in this way.
The default system label for a UO is OUTPUT. Ask your installer to define a
name, such as HEATING for each UO.
Home appliances can also be remotely activated and deactivated by using the
Voice module. Refer to the Voice Module Programming and Installation Manual
for more information.
There are two ways in which to activate home appliances from the keypad:
) From the User Functions menu, as described on page 33.
) By entering a code, as described on page 33.
To Next Page
Loading...
Need help?
General
