42 ProSYS User's Manual
Chapter 8: Viewing Trouble Conditions
[*] [3] [1] [CODE] [#]
A rapid flashing of the Power/
LED indicates a trouble condition. The
following procedure describes how to identify the trouble condition. Refer to
the table on page 66 for a list of possible trouble conditions and their
descriptions.
The system must be disarmed to view trouble conditions.
¾ To view trouble conditions:
1)
USER FUNCTIONS:
1) BYPASS
USER FUNCTIONS:
1) BYPASS
From the User Functions menu, select [3] View.
2)
VIEW
1) TROUBLE
VIEW
1) TROUBLE
Select [1] Trouble.
3)
INSERT CODE:INSERT CODE:
Enter your user code and press / .
The first trouble condition is displayed.
4)
TROUBLE
MAIN: LOW BATT
TROUBLE
MAIN: LOW BATT
If a (
) appears, other troubles exist. Scroll down
to view the next ones.
For an LED keypad, select the View/Trouble function by pressing [3] [1]
[USER CODE]
/ . The Zone LEDs flash according to the
trouble(s).
NOTE:
In some cases, you may be able to correct troubles and restore the system to
Normal Operation mode yourself. In other cases, your dealer (or other related
services) may be required. When all outstanding troubles are resolved, the
rapidly flashing Power/
LED on your keypad(s) lights steadily, and all
evidence of the troubles is automatically removed from your system.
To Next Page
Loading...
Need help?
General
