58 ProSYS User's Manual
Using a Proximity Tag
When using a proximity tag, the following points regarding assigned
partitions are relevant:
) If your user code is assigned to only one partition, then the partition
will arm or disarm automatically.
) If your user code is assigned to more then one partition, use the
/
or
/
keys to select the required partition(s)
and press
/
.
NOTE:
CE!: The proximity keypad is restricted from use in Greece.
¾ To use a proximity tag:
)
Hold the proximity tag close to the keypad's keys at a distance of
approximately 3 to 7 cm. Based on your user definitions:
The partition(s) assigned to your user code are armed/disarmed.
(Ask your installer for the number of partitions that are assigned to
your user code.)
-OR-
The defined home appliance(s) operates (based on its current
status).
To Next Page
Loading...
Need help?
General
