ProSYS User's Manual 9
Operating the System
The ProSYS can easily be operated locally or remotely depending on the
devices connected to the system.
You can issue commands to the system and in turn, the system will
communicate information to you via its display, indicators, voice messages,
SMS messages, Email messages and by the sounds it makes.
The ProSYS can be operated in the following ways:
) Locally through its keypad(s). There are two types of keypads: one with
an LED, and the other with an LCD. Using its keys, you can issue
commands to your system. In turn, the system can communicate
information to you via its display, indicators and by the sounds it
makes. See page 13 for a description of the different types of keypads.
) Locally or remotely using RISCO Group’s Upload/ Download software.
The Upload/Download software enables the installer to program the
system, and enables the user to operate the system and to view
system status.
) If your system is appropriately equipped, it can be armed using a
keyswitch, proximity tag or a wireless button key. These features must
be programmed by your installer.
) If your system is equipped with RISCO Group's GSM/GPRS module it
can provide information about the system by SMS and enable
operation of the system using SMS commands for arming the system,
disarming the system and more. For details information refer to the
manual provided with the GSM/GPRS module.
) If your system includes the Voice module, it can provide audible
information about system status, and enable any remote, touch-tone
(DTMF) telephone to act as a keypad for the system. Upon event
occurrence, such as alarm activation, the Voice module informs you of
a security situation by calling you and playing a prerecorded Event
announcement, as described in the Voice Module Programming and
To Next Page
Loading...
Need help?
General
