66 ProSYS User's Manual
Appendix A: System Troubles
The following table lists possible trouble conditions, their descriptions, and
recommended responses.
Trouble Description LED KP Response
Low
Battery
The capacity of the battery is low
or missing and needs to be
recharged or replaced.
Zone 1 LED
flashes.
Contact your dealer.
Loss of
AC Power
The commercial power has been
interrupted; the system will
continue to operate on its
standby battery as long as
possible.
Zone 2 LED
flashes.
Check the connection of the
panel's transformer to its
AC source. Be sure that
power has not been
interrupted or switched off.
Auxiliary
Failure
The panel's auxiliary power,
used to supply electric current to
designated devices (e.g. motion
detectors, keypads, and smoke
detectors), has failed.
Zone 4 LED
flashes.
Contact your dealer.
False
Code
Trouble
If enabled by your dealer, your
system will report a false code as
a trouble.
Zone 5 LED
flashes.
Once the trouble has been
displayed (LCD keypad
only),
it will automatically be
removed from the system.
Phone
Line
Failure
The telephone line used for
Monitoring Station communica-
tion is either disconnect-ed or
inoperative.
Zone 6 LED
flashes.
If all premises telephones
are operating properly,
contact your security dealer.
BUS
Failure
A fault has been detected in the
wiring supporting system
peripherals. The trouble
indicates the device with the
communication touble
Zone 7 LED
flashes.
Contact your dealer.
Clock Not
Set
The system's clock has lost track
of the time and/or date.
Zone 8 LED
flashes.
Set the system's time and
date.
To Next Page
Loading...
Need help?
General
