ProSYS User's Manual 37
3)
ACCESS CODE:
1) UPDATE CODES
ACCESS CODE:
1) UPDATE CODES
Select [1] Update Code.
4)
CODE 1234 GRAND
00) USER 00
CODE 1234 GRAND
00) USER 00
Enter the two-digit User Index number to which
you want to assign a user code.
For example, to assign a user code to user index
number 6, press [0] [6].
NOTES:
In ProSYS 128 systems, the User Index number is from 00 to 98.
In ProSYS 40 systems, the User Index number is from 00 to 59.
In ProSYS 16 systems, the User Index number is from 00 to 29.
The User Index number 00 belongs to the Grand Master user code.
5)
CODE 06, USER
ENTER: 0
CODE 06, USER
ENTER: 0
Enter a four/six digit code and press /
.
6)
CODE: 06, MSTR
ACCEPTED
CODE: 06, MSTR
ACCEPTED
If successful, a single confirmation beep is
sounded, and a message is displayed. If not,
three quick error beeps are sounded.
7)
SELECT CODE:
07) 0 USER
SELECT CODE:
07) 0 USER
Repeat the above steps for additional codes until
complete.
8)
When all codes are entered press
quickly to reset and exit
the User Functions menu.
Deleting User Codes
At times, it may be desirable to completely delete a user code. Note that it
is impossible to delete the Master Code (although it can be changed).
The system must be disarmed in order to delete user codes.
¾ To delete a user code:
1)
Follow steps 1-3 in the previous procedure.
2)
CODE 1234 GRAND
00) USER 00
CODE 1234 GRAND
00) USER 00
Enter the two-digit User Index number for which the
code is to be deleted.
For example, to delete the user code assigned to
user index number 6, press [0] [6].
To Next Page
Loading...
Need help?
General
