Risco ProSYS 16 User Manual

24 ProSYS User's Manual
Group Arming
Group arming enables you to arm a number of zones within a partition,
using the Function keys. Ask your installer about defining groups.
¾ To arm a group (if the system has one partition):
1)
Enter your code, followed by the Function key corresponding to the
group(s) you want to arm. The selected group is armed.
For example, to arm Group A, enter: [Code] [A].
2)
To arm another group, repeat step 1.
¾ To arm a group (if your user code is assigned to more than one
partition):
1)
Enter your user code, then the group letter, then the partition number,
and the group letter again.
For example, to arm Group A, enter:
[Code] [A] [Partition No] [A].
2)
To arm another group, repeat step 1.
NOTE:
If your system has Quick Arming, press the Function key corresponding to the group(s)
you want to arm. The selected group(s) is armed.
Quick Arming
Quick arming enables you to quickly arm the system with the press of a
key.
NOTE:
Quick Arming should be defined by your installer.
¾ To quick arm using away arming:
) Hold the tag close to the keypad's keys or press / .
The system is fully armed.
¾ To quick arm using stay arming:
) Hold the tag close to the keypad's keys or press / .
The system's external detectors are activated.

Risco ProSYS 16 Specifications

General

Brand	Risco
Model	ProSYS 16
Category	Security System
Language	English