ProSYS User's Manual 41
Assigning Double Codes
[*] [5] [CODE] [#] [7]
Double codes are a high-security option that ensures that the system is
disarmed only by pairs of users. This prevents individual users from
disarming the system alone, by making their user code active only if
accompanied by their partner's user code. The time between entering the
two user codes is 60 seconds.
NOTES:
Your installer must enable the Double Code feature.
The Authority Levels of Maid, Arm Only and Guard cannot be used to perform
Double Code disarming.
¾ To assign double codes:
1)
USER FUNCTIONS:
1) BYPASS
USER FUNCTIONS:
1) BYPASS
From the User Functions menu, select
[5] Access Code.
2)
INSERT CODE:INSERT CODE:
Enter your user code, followed by / .
3)
ACCESS CODE:
1) UPDATE CODES
ACCESS CODE:
1) UPDATE CODES
Select [7] Double Codes.
4)
DOUBLE CODE:
01) 00 WITH 00
DOUBLE CODE:
01) 00 WITH 00
Select the index number of the double code that
you want to assign.
5)
DOUBLE CODE 01:
1st=00 2nd=00
DOUBLE CODE 01:
1st=00 2nd=00
Enter the user index numbers of the users you
want to pair together for the double code, and
press / .
To Next Page
Loading...
Need help?
General
