8 ProSYS User's Manual
Chapter 1: Introduction
Congratulations on your purchase of RISCO Group's ProSYS Security
System. The ProSYS has been specifically designed to meet a wide range
of security needs for many residential and commercial applications.
The ProSYS includes the most advanced communication capabilities for
dual or triple-path communication to Monitoring Stations (MSs) using
telephone lines, GSM/GPRS network or TCP/IP network. It consists of a
variety of sensors, detectors, and contacts placed throughout the premises.
It is designed to recognize abnormal conditions and inform the system of
the status of any protected door, window, hallway, room, or area.
The Main Panel, which contains the system's electronics and backup
battery, functions in the background. For security purposes, it is
recommended that it be installed out of sight.
You can place a household appliance or premises lighting under the control
of the ProSYS, where it can be conveniently turned on and off
automatically or by user command from any system keypad, as described
on page 32.
In addition, the ProSYS supports the following optional RISCO Group
devices:
) Advanced Communication Module that enables the system to operate
over the IP network.
) GSM/GPRS module which enables the system to communicate over
the GSM/GPRS network, and also send or receive SMS commands.
) Access Control, which enables integrating access control capabilities
into your security system.
) Digital Voice Module which enables you to receive voice messages,
operate the system from a remote phone, and listen- in or speak to the
premises.
To Next Page
Loading...
Need help?
General
