rletech.com WiNG-MGR User Guide 61
3 Web Interface
Range Extender
Frequency Channel
Pair
If you wish to change the channel pair on which your system is
communicating, refer to Appendix C, “Alternate Channel Pair
Communications” on page 91.
Default: Channel pair 1
Radio Status - These fields provide detailed information about the status and operation of
the WiNG-MGR’s radios. The Spectrum field tells you if this unit operates on the900MHz or
868MHz frequency. If you need to make a call to RLE tech support, they may request
information found in these fields.
Attribute Description
Table 3.20
Radio Configuration Options
To Next Page
Loading...