rletech.com WiNG-MGR User Guide 63
3 Web Interface
Temp. Over Enter a high temperature alarm threshold - if the temperature rises
above this value, a high temperature alarm is generated.
Check the box to activate the option, and enter a temperature
value.
Temp. Under Enter a low temperature alarm threshold - if the temperature drops
below this value, a low temperature alarm is generated.
Check the box to activate the option, and enter a temperature
value.
Humidity Over Enter a high humidity alarm threshold - if the humidity rises above
this value, a high humidity alarm is generated.
Check the box to activate the option, and enter a humidity value.
Humidity Under Enter a low humidity alarm threshold - if the humidity drops below
this value, a low humidity alarm is generated.
Check the box to activate the option, and enter a humidity value.
Alarm Delays The number of seconds that pass between the time the system
goes into alarm and the time that alarm is announced.
Check the box to activate the option, and enter a time interval.
Offline Delays Users can designate how many minutes must pass before the
WiNG-MGR considers the sensor offline.
Check the box to activate the option, and enter a time interval.
Global Warning Settings - There is a checkbox next to each individual alarm setting.
Check this box to apply that particular setting to each sensor in the system. If you do not
check the checkbox next to the alarm parameter, that value will not be applied to the
sensors in your system.
Temp. Over Enter a high temperature warning threshold - if the temperature
rises above this value, a high temperature warning is generated.
Check the box to activate the option, and enter a temperature
value.
Temp. Under Enter a low temperature warning threshold - if the temperature
drops below this value, a low temperature warning is generated.
Check the box to activate the option, and enter a temperature
value.
Humidity Over Enter a high humidity warning threshold - if the humidity rises above
this value, a high humidity warning is generated.
Check the box to activate the option, and enter a humidity value.
Option Description
Table 3.21
Alarms Configuration Options
To Next Page
Loading...