Rlide R2 Series - Page 110

108
c.
Enter the second point (P2) to define the
baseline (P1-P2), and press [ENT].
Input P2
Input P2
1
P1:
1
P2:
P3:
Meas
Data
List
Stac
d.
Enter the third point (P3) to define the
second line (P1-P3). Press [ENT].
Input P3
Input P3
1
P1:
1
P2:
P3:
Meas
Data
List
Stac
e.
Display the result of the 3PT Angle.
Press [Dsp] to switch between 2 pages.
3PT-Angle
1/2
AZ:
45°00’00”
HD1:
2.000m
HD2:
2.818m
End
Dsp
Next
Page 2：
3PT-Angle
2/2
HD3:
2.000m
* HD1=P1-P2 HD
HD2=P1-P3 HD
HD3=P2-P3 HD
End
Dsp
Next
f.
To continue 3 Pt. Angle function, press
[Next]; To quit, press [End], screen
returns to Inverse menu.
11.2.2 Azimuth and Distance (AZ&Dist)
Use angle and distance to calculate coordinate. There are two ways to calculate new points in AZ&Dist
function.
11.2.2.1 AZ+HD
STEP
OPERATION
DISPLAY
a.
In Cogo menu press [2] (or [▼] + [ENT])
to enter the AZ&Dist menu.
[2]
COGO
1. Inverse
2. AZ@Dist
3. Area
4. LineOff.
5. InputXYZ