Rlide R2 Series - Page 111

109
b. In AZ&Dist menu press [1],
choosing AZ+HD.
[1]
AZ&Dist
1. AZ+HD
2. Store
c.
Input point name of base PT and press
[ENT]. About method to input, see “PT-
PT” Step e.
Input P1
Input P1
1
PT:
Meas
Data
List
Stac
d.
Input azimuth, horizontal distance (HD)
and vertical distance (VD) then press
[ENT].
Input HD, dVD
Input AZ
1
AZ:
HD:
dVD:
e.
A recording point screen with the
calculated coordinates appears. PT
defaults to the last recorded PT + 1. Input
code and press [ENT] to store the point.
N:
3.879m
E:
2.684m
Z:
4.000m
PT:
2
CD:
List
Stac
※1) To input120°35′05″, type 120.3505 and [ENT].
If you do not enter a value in the dVD field, the value 0.0000 is used.
11.2.2.2 Store
Store function calculates a new point based on the two defined points and angle, horizontal and vertical
distances from the line defined by those two points.
STEP
OPERATION
DISPLAY
a.
In AZ&Dist menu press [2] choosing
Store.
[2]
AZ&Dist
1. AZ+HD
2. Store