Rlide R2 Series - Page 112

110
b.
Input the point name of P1 and press
[ENT]. About method to input, see “PT-
PT” Step e.
InputP1
Input P1
1
P1:
P2:
Meas
Data
List
Stac
c.
Input P2 and press [ENT].
Input P2
Input P2
1
P1:
1
P2:
Meas
Data
List
Stac
d.
Enter the plus-minus angle, horizontal
distance, and vertical distance from the
baseline defined by P1-P2.If you do not
enter a value in the dVD field, the value
0.0000 is used.
Input+AZ, HD,
dVD
[ENT]
Input+AZ
1
+AZ:
HD:
dVD:
e.
When you press [ENT] in the dVD field,
a new point is calculated. The PT name
defaults to the last recorded PT + 1.
Press [ENT] to record the point.
N:
3.879m
E:
2.684m
Z:
4.000m
PT:
9
CD:
List
Stac
f.
Screen returns to the point input screen.
P1 (base PT) defaults to the previously
recorded PT. P2 defaults to the previous
P1.
Input P2
1
P1:
9
P2:
1
Meas
Data
List
Stac
g.
Enter the plus-minus angle, horizontal
distance, and vertical distance from the
baseline defined by P1-P2, press [ENT].
Input+AZ, HD,
dVD
[ENT]
Input+AZ
1
+AZ:
HD:
dVD: