a.
In PT item, insert wildcard “*” (take “*” for
example), and press [REC/ENT]
b.
Press up/down and [REC/ENT] to select
the point.
When [▲] or [▼] appears in the list，
left/right can turn the page.
c.
When a point is select from the list, the
coordinate will be displayed on the
screen.
d.
Press [REC/ENT] to return. This point is
called up. The cursor moves to next
item.
2.8.4 Enter a Point from the Point List
Point ID can be input via [List]. The meaning of the PtID list is the same as that of code list.
a.
Press [List] soft key when the cursor is in
the PT field.
b.
PtID list is displayed.
Press up/down arrowhead to move the
cursor to the point that you want to use,
and then press [REC/ENT].
To Next Page
Loading...