Rlide R2 Series - Page 17

15
c.
When you return to the PT input screen,
the selected PtID is entered in the PT
field. (You can add digits or alphabetic
characters if required.) Press
[REC/ENT] to confirm.
Input PT
PT:
230
1
HI:
1.000m
CD:
List
Stac
d.
A: If the inputted PtID exists in internal
memory, its coordinates will be
displayed on the screen. Press
[REC/ENT] to return.
B: If the inputted PtID does not exist, it is
required to input coordinate (as shown
on the right). Input the coordinate and
press [REC/ENT] to move the cursor to
the code item. Input the code, press
[REC/ENT] to save and quit.
A：
N:
10.000m
E:
10.000m
Z:
5.000m
PT:
1
CD:
RUIDE
B：
N:
1.000m
E:
Z:
PT:
2
CD:
e.
Return to PT inputting screen. The
cursor moves to next item.
Input PT
PT:
230
1
HI:
1.000m
CD:
List
Stac
2.8.5 Enter a Point from the Stack
STEP
OPERATION
DISPLAY
a.
When the cursor is on ST field, press
[Stac].
[Stac]
Input STN
ST:
1
HI:
1.000m
CD:
RUIDE
List
Stac
b.
The stacks of the points are displayed.
Press [▲]/ [▼] to select the PtID, and
press [REC/ENT].
[▲]/[▼]
[REC/ENT]
1
BC
▼