Rlide R2 Series - Routine Measurements; Cautions for Distance Measurement; EDM Setting

17
b.
A coordinate inputting screen is
displayed. Input the coordinate. After
inputting one item, press [REC/ENT] to
move to next item.
Input
coordinate
[ENT]
N:
E:
Z:
* This Pt. not save
c.
After inputting, press [REC/ENT] to
return.
[ENT]
Input PT
PT:
<Coord input>
1
HI:
1.000m
CD:
List
Stac
2.8.7 Record an Instant Measurement
You can also input a point by recording an instant measurement. To do this, press the Meas softkey.
STEP
OPERATION
DISPLAY
a.
Press [Meas] in PT inputting screen.
[Meas]
Input P1
P1:
1
P2:
Meas
List
Stac
b.
An observation screen appears. Press
[MSR1]/[MSR2] to start a
measurement. To change the height of
the target, press [Hot].
[MSR1]
[MSR2]
HA#
30°21’50”
VA#
52°26’25”
SD#
HT:
0.000m
* Sight Press [MSR]
HT
OK
c.
After measuring, the system
automatically enters into the point
recording screen. Input PtID and CD,
and press [REC/ENT] to record the
result.
Input PT &
CD
N:
10.000m
E:
10.000m
Z:
5.000m
PT:
1
CD:
List
Stac
d.
The screen returns. The cursor moves to
next item.
Input P1
P1:
<Coord measured>
1
P2:
Meas
List
Stac