Rlide R2 Series - Checking and Resetting Backsight Direction

43
b.
If no station is set before, program shows
the right graph.
!
Invalid STN
* Press any key
c.
Press any key to return to “Stn Setup”
menu, select one method to set station.
Stn Setup
1. Known
2. Rese
3. QuickStn
4. Z Coord
5. BS Check
d.
After the program record the station,
Input level point, and press [ENT]. ※1)
Enter point
name
[ENT]
Input PT
PT:
1
HI:
1.800m
CD:
List
Stac
e.
Enter height of target prism, and press
[ENT].
Enter height of
target prism
[ENT]
Input PT
PT:
1
1
HI:
1.800m
CD:
List
Stac
f.
Sight the center of prism, press [MSR1]
or [MSR2] to start survey.
If the horizontal circle is on Face-2,
screen would display “Turn to F1”. Rotate
the telescope and alidade, and sight the
BS point in Face-1.
Sight the target
[MSR 1]/
[MSR 2]
Level point
HA#
355°51’59”
VD#
HD#
* Sight Press [MSR]
F2
g.
The system finishes the measurement
and displays the result.
Level point
HA#
355°51’59”
VD#
-0.053m
HD#
1.982m
* Press [ENT]
F2